HP 610 Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and Ser - Page 88
secure the heat sink to the system board.
UPC - 884962591246
View all HP 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removal and replacement procedures Remove the heat sink: 1. Turn the system board upside down with the front toward you. ✎ Steps 2 and 3 apply to computer models equipped with graphics subsystems with discrete memory. See steps 4 and 5 for instructions on removing the heat sink on computer models equipped with graphics subsystems with UMA memory. 2. Loosen the four Phillips PM2.5×9.0 captive screws 1 and the two Phillips PM2.0×5.0 captive screws 2 that secure the heat sink to the system board. 3. Remove the heat sink 3. ✎ Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach the heat sink. Maintenance and Service Guide 4-45