HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1156

Historical Performance Monitoring Chapter 60 Performance Monitoring Send documentation comments to [email protected] Step 5 Define the data collection you want Performance Manager to gather, using the Performance Manager Configuration Wizard. See the "Creating a Collection with Performance Manager" section on page 60-4. a. Choose the VSAN you want to collect information for or choose All VSANs. b. Check the types of items you want to collect information for (Hosts, ISLs, Storage Devices, and Flows). c. Enter the URL for the Cisco Traffic Analyzer in the format http:/// where: ip address is the address of the management workstation on which you have installed the Cisco Traffic Analyzer, and directory is the path to the directory where the Cisco Traffic Analyzer is installed. d. Click Next. e. Review the data collection on this and the next section to make sure this is the data you want to collect. f. Click Finish to begin collecting data. Note Data is not collected for JBOD or for virtual ports. If you change the data collection configuration parameters during a data collection, you must stop and restart the collection process for your changes to take effect. Step 6 Choose Performance > Reports to generate a report. Performance Manager Web Server must be running. See the "Launching Fabric Manager Web Server" section on page 7-7. You see Web Services; click Custom then select a report template. Note It takes at least five minutes to start collecting data for a report. Do not attempt to generate a report in Performance Manager during the first five minutes of collection. Step 7 Click the Cisco Traffic Analyzer at the top of the Host or Storage detail pages to view the Cisco Traffic Analyzer information, or choose Performance > Traffic Analyzer > Open. The Cisco Traffic Analyzer page will not open unless ntop has been started already. Note For information on capturing a SPAN session and starting a Cisco Traffic Analyzer session to view it, refer to the Cisco MDS 9000 Family Port Analyzer Adapter 2 Installation and Configuration Note. Note For information on viewing and interpreting your Performance Manager data, see the "Historical Performance Monitoring" section on page 60-4. For information on viewing and interpreting your Cisco Traffic Analyzer data, refer to the Cisco MDS 9000 Family Port Analyzer Adapter 2 Installation and Configuration Note. 60-10 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-8007-10, Cisco MDS SAN-OS Release 3.x