HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 190

Performance Chapter 7 Fabric Manager Web Server Send documentation comments to [email protected] Note Click a pie chart (Hosts, Storage, or ISLs) to go to the appropriate performance table. Viewing Performance Information for End Devices To view host and storage port traffic and errors using Fabric Manager Web Server, follow these steps: Step 1 Choose Performance > End Devices. You see the End Devices tab shown in Figure 7-8. Figure 7-8 End Devices Tab Step 2 Expand a fabric and select one of the VSANs to display performance information for the end devices in that VSAN. Note There are variations to this procedure. In addition to these basic steps, you can also: • Select the type of ports and the time range, and click Filter to filter the display of those criteria. • Click the name of a device in the Name column to see a graph of the traffic on that device for the past 24 hours. You can change the time range for this graph by selecting it from the drop-down list in the upper right corner. 7-14 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-8007-10, Cisco MDS SAN-OS Release 3.x