HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 925

Chapter 46 Configuring Port Security Default Settings Send documentation comments to [email protected] Step 2 Step 3 Step 4 Select the Statistics tab. You see all the configuration databases. Select the appropriate configuration database and check the Clear option. Click the Apply Changes icon o save your changes. To clear any learned entries in the active database for a specified interface within a VSAN using Fabric Manager, follow the steps below: Step 1 Step 2 Step 3 Step 4 Expand a Fabric, expand a VSAN and then select Port Security in the Logical Domains pane. You see the Port Security information in the Information pane. Select the Actions tab. You see all the configuration databases. Select the appropriate configuration database and check the AutoLearn option. Click the Apply Changes icon to save your changes. Note You can clear the Statistics and the AutoLearn option only for switches that are local and do not acquire locks. Also, learned entries are only local to the switch and do not participate in distribution. Default Settings Table 46-6 lists the default settings for all port security features in any switch. Table 46-5 Default Security Settings Parameters Auto-learn Port security Distribution Default Enabled if port security is enabled. Disabled. Disabled. Note Enabling distribution enables it on all VSANs in the switch. Table 46-6 Default Security Settings Parameters Auto-learn Port security Distribution Default Enabled if port security is enabled. Disabled. Disabled. Note Enabling distribution enables it on all VSANs in the switch. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 46-25