HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1188

System Message Logging Configuration Chapter 63 Configuring System Message Logging Send documentation comments to [email protected] Figure 63-4 Switch Logging Tab in Device Manager Step 2 Step 3 Step 4 Check the check boxes where you want message logging to occur (ConsoleEnable, TerminalEnable, LineCardEnable). Choose the message severity threshold from the Console Severity drop-down box for each switch in Fabric Manager (see Figure 63-3) or click the appropriate message severity level radio button in Device Manager (see Figure 63-4). Click the Apply Changes icon in Fabric Manager, or click Apply in Device Manager to save and apply your changes. Log Files Logging messages can be saved to a log file. You can configure the name of this file and restrict its size as required. The default log file name is messages. The file name can have up to 80 characters and the file size ranges from 4096 bytes to 4194304 bytes. To send log messages to a file using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Select a switch in the Fabric pane. Expand Switches, expand Events and select SysLog in the Physical Attributes pane. You see the SysLog information in the Information pane. Select a switch in the Information pane. Click the Switch Logging tab. You see the information in Figure 63-5. 63-6 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x