HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 908

Port Security Configuration Guidelines Chapter 46 Configuring Port Security Send documentation comments to [email protected] Figure 46-4 Edit and Activate Configuration Page Step 6 Click Insert to create port binding. You see the Insert Port Security Devices dialog box as shown in Figure 46-5. Figure 46-5 Insert Port Security Devices Dialog Box Step 7 Step 8 Step 9 Step 10 Two types of port binding can be created using the Insert Port Security Devices dialog box: • Port WWN-pWWN bound to an interface WWN. • Switch-Switch WWN bound to an interface. (Mainly useful for ISL binding.) Select the type of port binding by clicking the radion buttons and enter the supporting values. Click OK. Click Close to exit the Insert Port Security.... window. Note To delete an entry in the Edit and Activate Configuration page of the wizard, select the entry and click the Delete button. 46-8 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x