HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1208

Call Home Configuration Distribution Chapter 64 Configuring Call Home Send documentation comments to [email protected] Step 3 Click the Control tab. You see the information shown in Figure 64-14. Figure 64-14 Call Home Control Tab Step 4 Step 5 Step 6 Select a switch in the Information pane. Check the Enable check box. Click the Apply Changes icon. Call Home Configuration Distribution You can enable fabric distribution for all Cisco MDS switches in the fabric. When you perform Call Home configurations, and distribution is enabled, that configuration is distributed to all the switches in the fabric. You automatically acquire a fabric-wide lock when you perform the first configuration operation after you enabled distribution in a switch. The Call Home application uses the effective and pending database model to store or commit the configuration changes. When you commit the configuration changes, the effective database is overwritten by the configuration changes in the pending database and all the switches in the fabric receive the same configuration. After making the configuration changes, you can choose to discard the changes by aborting the changes instead of committing them. In either case, the lock is released. See Chapter 13, "Using the CFS Infrastructure" for more information on the CFS application. Note The Switch priority and the Syscontact name are not distributed. To enable Call Home fabric distribution using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Select a switch in the Fabric pane. Expand Switches, expand Events, and select Call Home in the Physical Attributes pane. You see the Call Home information in the Information pane. Click the CFS tab. You see the CFS information for Call Home shown in Figure 64-15. 64-14 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x