HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 353

Chapter 18 Managing System Hardware About Crossbar Management Send documentation comments to [email protected] Figure 18-5 Shutting Down a Crossbar Step 2 Select Out of Service to gracefully shut down the integrated crossbar. Note To reactivate the integrated crossbar, you must remove and reinsert or replace the Supervisor-1 or Supervisor-2 module. Caution Taking the crossbar out of service may cause a supervisor switchover. To perform a graceful shutdown of integrated crossbars on the supervisor module in a Cisco MDS 9509 or 9506 Director using Device Manager, follow these steps: Step 1 Step 2 Right-click the external crossbar switching module. You see the context menu for that module. Select Out of Service to gracefully shut down the external crossbar switching module. Note To reactivate the external crossbar module, you must remove and reinsert or replace the crossbar module. Caution Taking the crossbar out of service may cause a supervisor switchover. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 18-9