HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 389

Chapter 20 Configuring Interfaces Fibre Channel Interfaces Send documentation comments to [email protected] Step 1 Step 2 Expand Switches > Interfaces and then select FC Physical. You see the interface configuration in the Information pane. Click the Physical tab to see the transmitter type for the selected interface. About Gathering Interface Statistics You can use Fabric Manager or Device Manager to collect interface statistics on any switch. These statistics are collected at intervals that you can set. Gathering Interface Statistics Note In Fabric Manager, you can collect interface statistics by expanding Switches > ISLs and selecting Statistics from the Physical Attributes pane. To gather and display interface counters using Device Manager, follow these steps: Step 1 Step 2 Step 3 Right-click an interface and select Monitor. You see the Interface Monitor dialog box. Set both the number of seconds at which you want to poll the interface statistics and how you want the data represented in the Interval drop-down menus. For example, click 10s and LastValue/sec. Select any tab shown in Figure 20-6 to view those related statistics. Figure 20-6 Device Manager Interface Monitor Dialog Box Step 4 Step 5 Step 6 Optionally, click the Pencil icon to reset the cumulative counters. Optionally, click the Save icon to save the gathered statistics to a file or select the Print icon to print the statistics. Click Close when you are finished gathering and displaying statistics. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 20-17