HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 191

Appendix A Cisco SME CLI Commands clear fc-redirect config Send documentation comments to [email protected] clear fc-redirect config To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command. clear fc-redirect {config vt vt-pwwn local-switch-only} vt vt-pwwn local-switch-only Specifies the virtual target (VT) of the configuration to be deleted. The format is hh:hh:hh:hh:hh:hh:hh:hh. Deletes the configuration only on the local switch. Defaults None. Command Modes EXEC mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines This command deletes configurations (including active configurations) on the FC-Redirect created by applications such as Cisco SME and DMM. This command enables the host server to talk to the storage array, which directly bypasses the individual Intelligent Service Applications (ISAs), and causes data corruption. You must use this command only as the last option to clear any left-over configurations which cannot be deleted from the application (Cisco SME and DMM). Use this command while decommissioning the switch. Examples The following example clears the FC-Redirect configuration on the switch: switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64 Deleting a configuration MAY result in DATA CORRUPTION. Do you want to continue? (y/n) [n] y Related Commands Command show fc-redirect active configs Description Displays all active configurations on the switch. OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide A-3