HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 224

show interface sme Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] show interface sme To display the information about Cisco SME interface, use the show interface sme command. show interface sme slot/port {brief | counters brief | description} Syntax Description slot port brief counters brief description Identifies the number of the MSM-18/4 module slot. Identifies the number of the Cisco SME port. Displays the brief information about Cisco SME interface. Displays the interface counters. Displays brief counter information. Displays the description of the interface. Defaults None. Command Modes EXEC mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the brief description of the Cisco SME interface: switch# show interface sme 3/1 brief Interface Status Cluster sme3/1 up c2 The following example displays the counters of the interface: switch# show interface sme 3/1 description sme3/1 5 minutes input rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec 5 minutes output rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec SME statistics input 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec clear 0 bytes, encrypt 0 bytes, decrypt 0 compress 0 bytes, decompress 0 bytes output 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec clear 0 bytes, encrypt 0 bytes, decrypt 0 compress 0 bytes, decompress 0 bytes compression ratio 0:0 flows 0 encrypt, 0 clear A-36 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x