HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 210

node Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] node To configure Cisco SME switch, use the node command. To disable this command, use the no form of the command. node {local | {A.B.C.D | X:X::X /n| DNS name}} no node {local | {A.B.C.D | X:X::X /n| DNS name}} Syntax Description local A.B.C.D X:X::X/n DNS name Configures the local switch. Specifies the IP address of the remote switch in IPv4 format. Specifies the IP address of the remote switch in IPv6 format. Specifies the name of the remote database. Defaults None. Command Modes Cisco SME cluster configuration submode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines None. Examples The following example adds the Cisco SME interface from a local switch: switch# config t switch(config)# sme cluster c1 switch(config-sme-cl)# node local switch(config-sme-cl-node)# The following example adds the Cisco SME interface from a remote switch: switch# config t switch(config))# sme cluster c1 switch(config-sme-cl)# node 171.71.23.33 switch(config-sme-cl-node)# Related Commands Command Description show sme cluster node Displays Cisco SME node information about a local or remote switch. A-22 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x