HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 234
shutdown (Cisco SME cluster configuration submode
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
shutdown (Cisco SME cluster configuration submode) Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] shutdown (Cisco SME cluster configuration submode) To disable a cluster for recovery, use the shutdown command. To enable the cluster for recovery, use the no form of the command. shutdown no shutdown Syntax Description This command has no arguments or keywords. Defaults None. Command Modes Cisco SME cluster configuration submode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines To disable operation of a cluster for the purpose of recovery, use the shutdown command. To enable the cluster for normal usage, use the no shutdown command. The default state for clusters is no shutdown. Use the shutdown command for cluster recovery. See the Chapter 9, "Cisco SME Troubleshooting" for additional details about recovery scenarios. Examples The following example restarts the cluster after recovery is complete: switch# config t switch(config)# sme cluster c1 switch(config-sme-cl)# no shutdown The following example disables the cluster operation in order to start recovery: switch# config t switch(config))# sme cluster c1 switch(config-sme-cl)# shutdown Related Commands Command show sme cluster Description Displays information about the Cisco SME cluster. A-46 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x