HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 78

Creating a Cisco SME Cluster Using the Cisco SME Wizard Chapter 4 Cisco SME Cluster Management Send documentation comments to [email protected] Step 2 A Store Keyshares screen opens. After the smart card applet finishes loading, click Next. Step 3 When entering smart card information, note the following: • Be sure that the smart card reader is connected using the USB port (see the "Installing Smart Card Drivers" section on page 2-17 in Chapter 2, "Getting Started"). • When you insert a smart card into the reader, the card will be verified. You will be prompted to initialize the card if the card has not been previously initialized. • For each smart card, each Cisco SME Recovery Officer must login and enter the smart card pin. • Make sure that you have the correct smart card drivers installed before proceeding. Enter the switch login information (username and password used to log in to Fabric Manager), the PIN number for the smart card, and a label that will identify the smart card. The PIN number and label were defined during the smart card initialization. Click Next. 4-16 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x