HP Cisco MDS 9120 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 193

Appendix A Cisco SME CLI Commands debug sme Send documentation comments to [email protected] debug sme To enable debugging for the Cisco SME features, use the debug sme command. To disable a debug command, use the no form of the command. debug sme {all | demux vsan vsan id | deque | error | event vsan vsan id | ha vsan vsan id | trace vsan vsan id | trace-detail vsan vsan id | warning vsan vsan id | wwn-janitor {disable | enable | set-timer-value}} no debug sme {all | demux vsan vsan id | deque | error | event vsan vsan id | ha vsan vsan id | trace vsan vsan id | trace-detail vsan vsan id | warning vsan vsan id | wwn-janitor {disable | enable | set-timer-value}} Syntax Description all demux vsan vsan id deque error event ha trace trace-detail warning wwn-janitor disable enable set-timer-value Enables debugging of all Cisco SME features. Enables debugging of Cisco SME message demux. Restricts debugging to a specified VSAN ID. The range is 1 to 4094. Enables debugging of Cisco SME message dequeue. Enables debugging of Cisco SME errors. Enables debugging of Cisco SME finite state machine (FSM) and events. Enables debugging of Cisco SME high availability (HA). Enables debugging of Cisco SME trace. Enables debugging of Cisco SME trace-detail. Enables debugging of Cisco SME warning. Displays Cisco SME WWN janitor related information. Disables SME WWN janitor task timer. Enables Cisco SME WWN janitor task timer. Sets Cisco SME WWN janitor task timer value in microseconds. The range is from 2000 to 240000. Defaults None. Command Modes EXEC mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output from the debug sme all command: OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide A-5