HP Color LaserJet Enterprise Flow MFP 6800 User Guide - Page 77
Print using the SuperSpeed USB 3.0 port (wired)
View all HP Color LaserJet Enterprise Flow MFP 6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4. Select Choose, select the name of the document to print, and then select Select. NOTE: The document might be in a folder. Open folders as necessary. 5. To adjust the number of copies, touch the box to the left of the Print button, and then select the number of copies from the keypad that opens. To close the keypad, select the Close button. 6. Select Print to print the document. Print using the SuperSpeed USB 3.0 port (wired) Enable the SuperSpeed USB 3.0 port for wired USB printing. The port is located in the interface ports area and is disabled by default. Use one of the following methods to enable the SuperSpeed USB 3.0 port. Once the port is enabled, install the product software in order to print using this port. Method one: Enable the SuperSpeed USB 3.0 port from the printer control panel menus Use the control panel to enable the port. 1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the Settings icon. 2. Open the following menus: a. General b. Enable Device USB 3. Select the Enabled option. Method two: Enable the SuperSpeed USB 3.0 port from the HP Embedded Web Server (network-connected printers only) Use the HP EWS to enable the port. 1. Find the printer IP address. On the printer control panel, select the Information button , and then select the Network icon to display the IP address or host name. 2. Open a web browser, and in the address line, type the IP address exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. 3. Select the Security tab. 4. On the left side of the screen, select General Security. 5. Scroll down to the Hardware Ports and select the following check boxes: Print using the SuperSpeed USB 3.0 port (wired) 65