HP Dc7700 HP Compaq dc7700 Business Desktop PC Service Reference Guide, 1st Ed - Page 150
Power Supply
UPC - 882780715318
View all HP Dc7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.17 Power Supply Å WARNING: Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer. 1. Prepare the computer for disassembly (Section 7.1). 2. Remove the computer cover (Section 7.5). 3. Remove the security clip. 4. Rotate the drive cage up and disconnect the power cables from all of the drives. 5. Disconnect the power cables from the system board. 6. Release the power supply cable from the cable retaining clips on the bottom of the chassis under the drive cage. 7. Disconnect the hood sensor from the system board and remove the sensor from the power supply if required (Section 7.3). 7-36 433612-001 Service Reference Guide, dc7700