HP Dc7700 HP Compaq dc7700 Business Desktop PC Service Reference Guide, 1st Ed - Page 96
Front I/O Device
UPC - 882780715318
View all HP Dc7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis 6.14 Front I/O Device 1. Prepare the computer for disassembly (Section 6.1). 2. Remove the computer access panel (Section 6.5). 3. Remove the front bezel (Section 6.6). 4. Disconnect the two I/O device cables from the system board: the front USB cable pair and the front audio cable. 5. Remove the two screws that secure the front I/O device to the mounting bracket 1. 6. Remove the two screws that secure the mounting bracket to the chassis 2. 7. Lift the mounting bracket off the chassis 3. 8. Carefully pull the cables from the front of the chassis making sure that they do not snag on the lower drive cage. To reinstall the I/O device: 1. Thread the cables through the opening and down the space in front of the lower drive cage. This step may be easier if you thread a single cable at a time through the opening. Ä CAUTION: Be careful when threading the cables in the chassis so the cable ends are not damaged. 2. Position the I/O device and the mounting bracket on the front of the chassis and install the two screws that secure the bracket to the chassis. 3. Install the two screws that secure the I/O device to the mounting bracket. Complete the reassembly by reinstalling the other parts that had been removed. 6-26 433612-001 Service Reference Guide, dc7700