HP Officejet 300 HP OfficeJet Model 330 and Model 350 - (English) User Guide - Page 193

This message: Printing. . . Waiting for data Ready Out of fax paper Redial pending Try again later Remove document and reload Removing document Report cancelled Report in memory press START Self test (Please wait) Has this meaning: The printer has paused to wait for further print data. Either there is no paper loaded in the paper tray, or envelopes are loaded. You tried to send a fax from the fax loading tray while a memory-stored fax was waiting to redial (sending to a group or sending a delayed fax). The HP OfficeJet was unable to load the document you placed into the fax loading tray. A document is being ejected from the fax loading tray after you cancelled a fax or a copy, or after the power was lost during scanning. You pressed the Stop button while a report was being printed. The HP OfficeJet stored an automatic report in memory while the paper tray was empty. Each time the power is turned on, the HP OfficeJet tests itself to make sure it's in good working order. If it finds a problem, an error message will be displayed. And requires this action: Usually, no action is required. However, if you are waiting for the last page of your print job at the time you see this message, press Load/Eject to eject the last page. If you are printing envelopes and have the correct media size selected in your software, you may continue. If you want to print received faxes, make copies, or print reports from the menu, Load Letter-, A4-, or Legal-size paper into the paper tray, using the instructions in "Choosing Media" in chapter 4. Wait until the memory-stored fax has been sent before sending a fax from the fax loading tray. Remove the document from the fax loading tray, straighten the stack, and reload it. No action is required. If you don't want to wait while each page is ejected, open the front panel and remove the document yourself. Then close the front panel. No action is required. Press Start/Copy to begin printing the report. Wait for a few seconds for this message to clear before using the HP OfficeJet. If a "SYSTEM ERROR" message is displayed, advising you to call for service, please record the 3-digit error number before calling.