HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 19
Computer Setup—Power, Table 2-5
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Computer Setup-Power Table 2-5 Computer Setup-Power Option OS Power Management Description ● ACPI S3 Hard Disk Reset-Enabling this causes the BIOS to ensure hard disks are ready to accept commands after resuming from S3 before returning control to the operating system. ● ACPI S3 PS2 Mouse Wakeup-Enables or disables waking from S3 due to PS2 mouse activity. ● USB Wake on Device Insertion (some models)-Allows system to wake from Standby on USB device insertion. ● Unique Sleep Blink Rates-This feature is designed to give the user a visual indication of the sleep state the system is in. Each sleep state has a unique blink pattern: ◦ S0 = Solid green LED. ◦ S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., repeated cycles of 3 blinks and a pause. ◦ S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., repeated cycles of 4 blinks and a pause. ◦ S5 = LED is off. Hardware Power Management If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3 use 1 blink per second. ● S5 Maximum Power Savings (some models)-Enable/Disable. Enabling this feature reduces the power of this system as much as possible in the S5 state. Power is removed from the wake up circuitry, the expansion slots, and any management features while in S5. ● SATA power management enables or disables SATA bus and/or device power management. Thermal Fan idle mode-This bar graph controls the minimum permitted fan speed. NOTE: This setting only changes the minimum fan speed. The fans are still automatically controlled. Computer Setup (F10) Utilities 11