HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 46

Computer Cover, CAUTION

Get HP Rp3000 - Point of Sale System PDF manuals and user guides
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

4. Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the lock. Use the key provided to disengage the lock. Figure 6-6 Engaging the Lock Computer Cover CAUTION: To reduce risk of damage to optical drive sensor, make sure you closely follow the computer cover removal instructions. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 34). 2. Remove the two screws on the rear of the computer (1) that secure the cover to the computer chassis. 3. Slide the computer cover forward about 1.3 cm (½ inch), then lift it off the unit (2). Figure 6-7 Removing the Computer Cover To install the computer cover, reverse the removal procedure. NOTE: When removing the cover, be careful not to damage the small switch located on the front of the chassis as shown in the following image. 38 Chapter 6 Removal and Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
4.
Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the
lock. Use the key provided to disengage the lock.
Figure 6-6
Engaging the Lock
Computer Cover
CAUTION:
To reduce risk of damage to optical drive sensor, make sure you closely follow the
computer cover removal instructions.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
34
).
2.
Remove the two screws on the rear of the computer
(1)
that secure the cover to the computer
chassis.
3.
Slide the computer cover forward about 1.3 cm (½ inch), then lift it off the unit
(2)
.
Figure 6-7
Removing the Computer Cover
To install the computer cover, reverse the removal procedure.
NOTE:
When removing the cover, be careful not to damage the small switch located on the front of
the chassis as shown in the following image.
38
Chapter 6
Removal and Replacement Procedures