HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 53
Expansion Cards, Introduction, Installing and Removing a PCI Card or PCI Express x1 Card
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
7. Repeat steps 5 and 6 to install any additional modules. 8. Return the drive cage to the down position. 9. Replace the computer cover. 10. Reconnect the power cord and any external devices, then turn on the computer. The computer should automatically recognize the additional memory when you turn on the computer. 11. Lock any security devices that were disengaged when the computer cover was removed. Expansion Cards Introduction The computer has either a full-height PCI expansion slot (1) or a full-height PCI Express x1 expansion slot (2), depending on the model. NOTE: The maximum length supported for a PCI card or a PCI Express x1 card is 16.76 cm (6.6 inches). Figure 6-13 Expansion Slot Locations Installing and Removing a PCI Card or PCI Express x1 Card You can install one full-height PCI expansion card or one full-height PCI Express x1 expansion card, depending on the model. To install an expansion card: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 34). 2. Remove the computer cover (Computer Cover on page 38). Expansion Cards 45