HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 76

Modem (some models),

Get HP Rp3000 - Point of Sale System PDF manuals and user guides
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

5. Squeeze the switch holder retaining clips together at the front of the chassis (1), push the LEDs (2) and switch assembly into the chassis, and then remove the assembly from the chassis. Figure 6-47 Removing the Switch Holder 6. Raise the drive cage to its upright position. 7. Disconnect the cable assembly from the system board. 8. Remove the assembly from the chassis. To reinstall the power switch/LED assembly, reverse the removal procedure. Modem (some models) 1. Prepare the computer for disassembly (Preparation for Disassembly on page 34). 2. Remove the computer cover (Computer Cover on page 38). 3. Position the computer with the rear facing toward you. 4. Raise the drive cage to its upright position. 5. Remove the two screws that secure the modem to the system board, and then lift the modem straight up and off the system board. Figure 6-48 Removing the Modem 68 Chapter 6 Removal and Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
5.
Squeeze the switch holder retaining clips together at the front of the chassis
(1)
, push the LEDs
(2)
and switch assembly into the chassis, and then remove the assembly from the chassis.
Figure 6-47
Removing the Switch Holder
6.
Raise the drive cage to its upright position.
7.
Disconnect the cable assembly from the system board.
8.
Remove the assembly from the chassis.
To reinstall the power switch/LED assembly, reverse the removal procedure.
Modem (some models)
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
34
).
2.
Remove the computer cover (
Computer Cover
on page
38
).
3.
Position the computer with the rear facing toward you.
4.
Raise the drive cage to its upright position.
5.
Remove the two screws that secure the modem to the system board, and then lift the modem
straight up and off the system board.
Figure 6-48
Removing the Modem
68
Chapter 6
Removal and Replacement Procedures