HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 73
Installing the Hard Drive
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
6. Slide the hard drive back approximately 1.3 cm (1/2 inch) and remove it from the drive cage. Figure 6-42 Removing the Hard Drive To install a hard drive: 1. Follow the procedure above to remove the old hard drive. 2. Insert the hard drive "upside down." Align the hard drive with the hard drive bay in the drive cage so that the bottom of the hard drive is next to the optical drive compartment and the power and data connectors are up. Slide the drive all the way down into the drive cage until it stops. Figure 6-43 Installing the Hard Drive Drives 65
6.
Slide the hard drive back approximately 1.3 cm (1/2 inch) and remove it from the drive cage.
Figure 6-42
Removing the Hard Drive
To install a hard drive:
1.
Follow the procedure above to remove the old hard drive.
2.
Insert the hard drive “upside down.” Align the hard drive with the hard drive bay in the drive cage
so that the bottom of the hard drive is next to the optical drive compartment and the power and
data connectors are up. Slide the drive all the way down into the drive cage until it stops.
Figure 6-43
Installing the Hard Drive
Drives
65