HP Rp3000 Service Reference Guide: HP rp3000 Point of Sale - Page 55
CAUTION, Removing an Expansion Card
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
b. If you are replacing an existing card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. Figure 6-16 Removing an Expansion Card 5. Store the removed card in anti-static packaging. 6. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. 7. To install a new expansion card, align the bracket on the expansion card with the open slot on the rear of the chassis and press the card straight into the expansion socket. Figure 6-17 Installing an Expansion Card NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. Expansion Cards 47