HP Scitex LX850 HP Scitex LX850 & LX820 Printers: User's Guide - English - Page 26
Tips for specific substrates
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Handle the substrate After you have loaded a roll: ● Make sure that the edge holders are set on both sides of the roll. Do not use any other Edge holder from another printer, only use the edge holders that came with the printer. An incorrectly loaded roll may cause waves or cockles in the substrate, leading to ink smearing and printhead crashes. ● Check the correct carriage beam position for printing: high for thick substrates, normal for others. See Set the carriage beam position on page 25. ● Check that you are using the correct substrate preset in the HP Internal Print Server and the correct ICC profile and other settings in the RIP. ● HP substrates are optimized to provide the best out-of-the-box printing experience with your printer. However, you may want to modify the ink limits or the number of passes; in which case, temperature, vacuum or tensions may need to be adjusted. You can create a new substrate preset from the default preset you are using and make your changes. ● Use the HP Internal Print Server to check that any required calibrations have been done: color calibration, substrate-advance compensation, printhead alignment. See the Maintenance and troubleshooting guide. ● For the best print quality, the substrate should stay flat and unwrinkled in the printing zone, the substrate advance should be constant and the substrate should move straight. ● Do not cut off pieces of substrate while the substrate is loaded into the printer. This may cause the remaining substrate to jam. After printing, try to allow 24 hours before stacking, folding or rolling printed substrates. NOTE: Printing on porous substrates may result in visible vapor being generated from the waterbased ink. You can find further information on the Web: ● The specifications, finishing, processing and warranty information for each individual HP substrate are available from http://www.hp.com/go/designjet/supplies/latex/. ● HP Image Permanence information is available from http://www.hp.com/go/supplies/ printpermanence/. ● HP offers recyclable substrates such as HP HDPE Reinforced Banner, HP Wrinkle-free Flag with liner, HP Heavy Textile Banner, HP Photo-realistic Poster Paper and HP DuPont™ Tyvek® Banner. Recycling opportunities for these products may not exist in all areas. You should consult local recycling resources about recycling these products. For recycling in the USA, please go to the HP recycling services site, http://www.hp.com/go/recycleLFmedia/. Tips for specific substrates Substrate HP Durable Frontlit Scrim Banner HP Outdoor Frontlit Scrim Banner Printing side Inside (smooth side) Inside (smooth side) Printing tips Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 64. Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 64. 22 Chapter 3 Handle the substrate ENWW