HP Scitex LX850 HP Scitex LX850 & LX820 Printers: User's Guide - English - Page 94
Create a job, Select images to print, Define double-sided job
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
NOTE: The images of Side A and Side B must have the same dimensions. The image that you select for each side must be the same image for the entire side. Create a job Any image created in the RIP can be printed in either side A or side B, without any special requirements. However, side A and side B must have the same dimensions when printed on the substrate. Select images to print 1. Select Create a job to print in the Internal Print Server. 2. Check the Double-sided printing box and select the image to print. You can specify if you want the same image on Side A and Side B or have a different image on side B: ● Print the same image on both sides (the default) by selecting the file. ● Print two different images, job A on side A and job B in side B: by holding down the control key and selecting the other image for side B. The dimensions of the side B job must be the same as side A. 3. Select Open. Define double-sided job The following screen is displayed. This is where you can define the properties of the double-sided job. 90 Chapter 5 Printing options ENWW Printing