HP Scitex LX850 HP Scitex LX850 & LX820 Printers: User's Guide - English - Page 58
mm 40 in: 610-mm 24-in and two 203-mm 8-in tubes
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
This configuration is similar to the roll-to-free-fall configuration, but with the addition of a collector roller and loop shaper. The following illustration shows a completed configuration with a single roll of porous substrate, so the ink collector kit has been installed. Handle the substrate TIP: Do not try to load or unload the collector while printing. Before starting to load the substrate, select a loop shaper of the correct length to match the substrate width. The following tubes are supplied so that you can make up loop shapers of many different lengths. ● One 152-mm (6-in) tube ● Two 203-mm (8-in) tubes ● One 305-mm (12-in) tube ● One 610-mm (24-in) tube ● Two 1067-mm (42-in) tubes ● Two end flanges, to be placed at each end to avoid lateral displacement of the loop shaper during printing For example, you can make up the following loop shapers. ● 914 mm (36 in): 610-mm (24-in) and 305-mm (12-in) tubes ● 1016 mm (40 in): 610-mm (24-in) and two 203-mm (8-in) tubes ● 1270 mm (50 in): 1067-mm (42-in) and 203-mm (8-in) tubes ● 1372 mm (54 in): 1067-mm (42-in) and 305-mm (12-in) tubes ● 1524 mm (60 in): 1067-mm (42-in), 305-mm (12-in) and 152-mm (6-in) tubes ● 1829 mm (72 in): 1067-mm (42-in), 610-mm (24-in) and 152-mm (6-in) tubes ● 1981 mm (78 in): 1067-mm (42-in), 610-mm (24-in) and two 152-mm (6-in) tubes ● 2032 mm (80 in): 1067-mm (42-in), 610-mm (24-in), 203-mm (8-in) and 152-mm (6-in) tubes ● 2489 mm (98 in): two 1067-mm (42-in), 203-mm (8-in) and 152-mm (6-in) tubes 54 Chapter 3 Handle the substrate ENWW