HP Scitex LX850 HP Scitex LX850 & LX820 Printers: User's Guide - English - Page 32

The ink collector kit (LX850 only), Kit components, Install the kit

Get HP Scitex LX850 PDF manuals and user guides View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Handle the substrate The ink collector kit (LX850 only) Before printing on porous substrates, such as textile substrates, you must install the ink collector kit provided with your printer, to protect the printer from the ink that falls through the substrate. The kit must be removed before printing on non-porous substrates. Kit components 1. Ink collector container 2. 8 ink collectors with replaceable foams Install the kit The ink collector kit must be installed before printing on porous substrates. WARNING! Do not touch the internal enclosures of the printer's drying and curing modules while installing the ink collector kit: they can be hot enough to cause burns. CAUTION: Do not install the ink collector kit without declaring the configuration to the HP Internal Print Server. 1. If any substrate is loaded, unload it. 2. Raise the carriage beam to its highest position. 3. Remove the edge holders from the substrate path. 4. If necessary, clean the platen and the curing plates with a cloth dampened with an all-purpose cleaner. 5. Open the ink collector container and check that the ink collector foams are dry. 6. Follow the instructions in the HP Internal Print Server to complete the installation. If you need further information, read the steps below. CAUTION: If you install the kit incorrectly, some parts of the printer may be damaged. 28 Chapter 3 Handle the substrate ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
The ink collector kit (LX850 only)
Before printing on porous substrates, such as textile substrates, you must install the ink collector kit
provided with your printer, to protect the printer from the ink that falls through the substrate. The kit must
be removed before printing on non-porous substrates.
Kit components
1.
Ink collector container
2.
8 ink collectors with replaceable foams
Install the kit
The ink collector kit must be installed before printing on porous substrates.
WARNING!
Do not touch the internal enclosures of the printer's drying and curing modules while
installing the ink collector kit: they can be hot enough to cause burns.
CAUTION:
Do not install the ink collector kit without declaring the configuration to the HP Internal
Print Server.
1.
If any substrate is loaded, unload it.
2.
Raise the carriage beam to its highest position.
3.
Remove the edge holders from the substrate path.
4.
If necessary, clean the platen and the curing plates with a cloth dampened with an all-purpose
cleaner.
5.
Open the ink collector container and check that the ink collector foams are dry.
6.
Follow the instructions in the HP Internal Print Server to complete the installation. If you need further
information, read the steps below.
CAUTION:
If you install the kit incorrectly, some parts of the printer may be damaged.
28
Chapter 3
Handle the substrate
ENWW
Handle the substrate