HP Scitex LX850 HP Scitex LX850 & LX820 Printers: User's Guide - English - Page 47
Load a roll (dual roll-to-roll configuration), when you might want to turn off automatic tracking, see
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
23. In the HP Internal Print Server, choose from the list of substrate types the type that you have loaded. The contents of the Loaded Substrate window are determined automatically when the substrate is loaded and checked. However, if the printer is unable to detect the edges of the substrate (for instance, in the case of a transparent substrate), you will have to measure the distance of the left edge from the printer's side plate, and complete the Left Edge and Width fields yourself. For more information on when you might want to change the carriage beam position, see Substrate tips on page 21. An alert regarding substrate advance tracking may appear at this point. For more information on when you might want to turn off automatic tracking, see Fine-tune the settings in your new preset on page 67 and the Maintenance and troubleshooting guide. The printer is now ready to print. Load a roll (dual roll-to-roll configuration) The two substrate rolls are mounted on the rear dual-roll spindle and will be collected on the front dualroll spindle. The substrate goes from the rear spindle over the main roller, over the platen, over the front roller and then to the front spindle. Handle the substrate ENWW Load a roll into the printer 43