Hitachi 42HDW10 Owners Guide - Page 48
OPERATING INSTRUCTIONS continued
View all Hitachi 42HDW10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
OPERATING INSTRUCTIONS (continued) ENGLISH Input Selection I The input is switched by pressing the RGB1, RGB2, VIDEO1 or VIDEO2 button on the remote control. Pressing the INPUT SELECT button on the monitor main unit switches the input in the order of RGB1 → RGB2 → VIDEO1 → VIDEO2 → RGB1. • When the same signal is input to RGB1 and Remote controller VIDEO 1 VIDEO 2 RGB 1 RGB 2 When using INPUT SELECT RGB1 (D-sub input) RGB2, the phase may in some cases shift Main unit slightly but this is not a malfunction. In such case, readjust the PHASE of the one being RGB2 (BNC input) VIDEO1 (composite or S input) used. INPUT SELECT VIDEO2 (COMPONENT input) Volume Adjustment I While the on-screen display system, ( 12 ) is not on display, press the remote controller VOLUME button or VOLUME+ VOLUME- (or the main unit VOLUME button L or M to adjust the sound volume. • The adjustment status will be displayed as guidance while you press these buttons. Remote controller VOLUME+ Sound volume setting • While the guidance is on display, press VOLUME+ VOLUME- or L to turn up the volume. • While the guidance is on display, press VOLUME- Main unit or M to turn down the volume. VOLUME : 30 • You can also adjust the sound volume setting via the on-screen display system 14 . Adjustment status guidance VOLUME • The sound volume adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.) Sound Mute I Press the remote controller MUTE button to mute the sound temporarily. • When you press the button, [MUTE] (pink) and the status of volume setting will be displayed in a guidance image. • While the sound is muted, press the VOLUME- button to turn down the volume. • While the sound is muted, press the VOLUME+ button to cancel the mute. • You can also adjust the sound volume setting of the mute via the on-screen display system 14 . Remote controller MUTE Sound volume setting MUTE : 30 (The display will turn to pink.) I Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard. • When MUTE is used, the guide display will continue for 5 sec. and then turn off. 10