Hitachi 42HDW10 Owners Guide - Page 49

ENGLISH Contrast Adjustment I While the on-screen display system 12 , is not on display, press the remote controller SELECT button or to adjust the contrast. • When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical (V) frequencies of the input signal will be displayed in a guidance image. (For RGB input only) • While the guidance is on display, press the key to narrow the difference between darkness and brightness. • While the guidance is on display, press the key to widen the difference between darkness and brightness. • You can also adjust the contrast setting via the on-screen display system 13 . • The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.) Remote controller VIDEO CONTRAST : 100 RGB Contrast setting CONTRAST : 100 ** * ** * H : . kHz, V : . Hz Input horizontal Input vertical frequency frequency Adjustment status guidance Size Selection I Each press on the SIZE button on the remote control switches the display size of the screen (or the display area) in the following order. The selected mode is displayed in the lower part of the screen. •RGB signal input NORMAL FULL ZOOM Remote controller SIZE FULL •VIDEO signal input 4:3 PANORAM. MOVIE1 FULL MOVIE2 • Depending on the signal type, sometimes it may not be possible to change screen size. Sometimes certain sizes may be unavailable. 15 16 Input Signal Status Display I Press the remote controller RECALL button to display the status of input signals on the screen. I Press the remote controller RECALL button Remote controller once again to exit the screen display. RECALL • The Menu will clear 5 seconds later. VIDEO VIDEO2 [COMPONENT] Input terminal name RGB RGB1 [D-SUB] H : 46.5kHz, V : 60.0Hz Input horizontal frequency Input vertical frequency 11