Hitachi 42HDW10 Owners Guide - Page 68

ENGLISH PRODUCT SPECIFICATIONS (continued) Recommended Signal List (continued) Composite / S input (VIDEO 1 input) No. Signal Name NTSC 1 NTSC-4.43 M-PAL PAL 2 N-PAL SECAM Signal mode Resolution Vertical frequency (Hz) Horizontal Dot clock frequency (kHz) frequency (MHz) Remarks 525 59.94 15.73 - 625 50.00 15.63 - Component input (VIDEO 1 input) No. Signal Name 1 480/60i 2 575/50i 3 480/60p 4 720/60p 5 1080/60i 6 1035/60i Signal mode Resolution 480 Vertical frequency (Hz) 59.94 Horizontal Dot clock frequency (kHz) frequency (MHz) 15.73 - Remarks 575 50.00 15.63 - 480 59.94 31.47 - 720 59.94 44.96 - 1080 60.00 33.75 - 1035 60.00 33.75 - • The type of video board or connecting cable used may not allow for correct displays adjustment of H.POSITION, V.POSITION, CLOCK and PHASE. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it. • The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same signal. • Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of stripes. • Use of this monitor with the input signal timings specified below is recommended. A predefined setting may not be reproduced correctly with an extremely long front porch or back porch or with an extremely short data display time. Horizontal timing Horizontal frequency 24 kHz to 52 kHz Horizontal frequency 52 kHz to 107 kHz Vertical timing Front porch Sync width 0.2 µs or more 1.0-4.0 µs 0.2 µs or more 9 µs or more 0.8-3.0 µs 25 µs or more Back porch 1.2 µs or more Blanking width 3.5 µs or more 1.1 µs or more 2.3 µs or more 400 µs or more 450 µs or more 30