IBM 8863 Service Guide - Page 79
Cntrl, Sequencer, error., Update, microcode, Serial, Attached, controller, Updating, firmware,
UPC - 000435474667
View all IBM 8863 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, Type 8863," on page 93 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)", that step must be performed only by a trained service technician. Error code Description Action 030-269-001 Link m Cntrl 1 Sequencer error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. 030-270-001 On Chip Memory access error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. 030-271-001 SRAM access error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. 030-272-001 NVRAM access error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. 030-273-001 FLASH access error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. 030-274-001 Base Addr Register Key error. 1. Update the microcode for the Serial Attached SCSI (SAS) controller (see "Updating the firmware" on page 133). 2. Update the BIOS code (see "Updating the firmware" on page 133). 3. Reseat the I/O board. 4. Replace the I/O board. Chapter 2. Diagnostics 63