Icom IC-M92D Instruction Manual - Page 47
Push [CALL] to transmit the Polling Request Call.
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
New2001 DSC OPERATION 8 r Push [CALL] to transmit the Polling Request Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. t After the Polling Request Call has been transmitted, the following screen is displayed. • The transceiver waits for an acknowledgment call on channel 70 for 10 secconds, then waits for a call by alternately monitoring channel 70 and the operating channel. 1 y When the acknowledgement call is received, beeps sound 2 and the following screen is displayed. 3 4 5 6 7 u Push [ALARM OFF] to stop the beeps, and then the screen 8 as shown below is displayed. 9 10 11 12 13 i Push [EXIT] to return to the normal operating mode. 14 15 16 40
40
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Polling Request Call.
r
•
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Polling Request Call has been transmitted, the
t
following screen is displayed.
•
The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound
y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen
u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode.
i