Icom IC-M92D Instruction Manual - Page 58
Receiving DSC calls
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
New2001 New 8 DSC OPERATION ■ Receiving DSC calls D Receiving a Distress Call When a Distress Call is received: ➥ The emergency alarm sounds for 2 minutes. ➥ "RCVD DISTRESS" pops up and the LCD backlight blinks. q Push [ALARM OFF] to stop the alarm and the blinking backlight. w Push a softkey to select your desired action. [INFO] ➥ Push to display the Received call information. (p. 63) [ACPT] ➥ Push to accept the call. And then, push [CH 16] to switch the operating channel to Channel 16, and then monitor it, as a coast station may require assistance. • If you haven't pushed [CH 16] within 10 seconds, the operat- ing channel automatically switches to Channel 16. (p. 67) [IGN] ➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • By pushing [PTT], the transceiver also exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. 51 Push