Icom IC-M92D Instruction Manual - Page 87
Compass screen, GPS status screen
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
OTHER FUNCTIONS 9 ■ Compass screen ■ GPS status screen 1 The compass screen displays your vessel's COG (Course GPS Status displays the quantity, signal power and position 2 Over Ground) and SOG (Speed Over Ground) which can be of the GPS satellites. 3 checked at a glance. Sky view shows the position of visible GPS satellites. The screen also shows the direction, elevation angle, satellite 4 Push [COMP]. numbers and their receiving signal strength status. 5 • The screen as shown below is displayed. COG display Shows compass direction q Push [MENU] to enter the menu screen. w Push [Y]/[[Z] to select "GPS Status," then push [ENTER]. 6 7 • Sky view screen is displayed. Your position (Longitude) 8 Your position (Latitude) 9 10 SOG display • Push [SEL] to select compass direction between N-UP and AC-UP. - N-UP : The top is always north - AC-UP : The compass is always pointed in your course heading direction. • Push [EXIT] to return to the normal operating mode. 11 Sky view 12 13 GPS mode* 14 • Push [DISP] each time to toggle between the sky view and satellite signal power screens. 15 • Push [BACK] to return to the menu screen. 16 • Push [EXIT] to return to the normal operating mode. *"3D" is displayed when more than 4 satellites are tracked. When less than 3 satellites are tracked, "2D" is displayed. 80