Icom IC-M92D Instruction Manual - Page 95
Monitor, Float 'n Flash
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
MENU SCREEN OPERATION 10 1 • DSC Related When the LCD displays the screen related to the DSC, and no D Float 'n Flash Float 'n Flash function detects that the transceiver has come 2 key operation occurs for this set period except during distress in contact with water. When the function activates, LCD back- 3 operation, the transceiver automatically returns to the normal operating screen. (Default: 15 min) light, keys and trim start to blink to make it easy to find the transceiver even at night or in a dark environment. 4 5 6 7 D Monitor 8 Select the desired Monitor switch action. See page 15 for 9 details (Monitor function). Function : Turn the Float 'n Flash function ON or OFF. (Default: ON) 10 Auto OFF : Set the Auto OFF time period to between 0 11 and 30 seconds (in 10 second steps). After taking the transceiver out of the water, the 12 Push : The monitor function is activated by holding down [VOL/SQL] for 1 second. The squelch opens while holding down the key. Cycle LCD backlight keeps blinking during this set 13 period. (Default: 20 seconds) 14 : Set the LCD backlight blinking cycle to 0.5, 1, 2 or 4 seconds. The LCD backlight turns ON 15 Hold : The monitor function is activated by holding down [VOL/SQL] for 1 second. The squelch stays open for 0.5 seconds, and then turns OFF for this set time period. (Default: 0.5 seconds) 16 until any key is pushed. D Unit Select either the Nautical Mile or Kilo-Meter format to display the distance. Alarm : Select whether or not the alarm sounds while the LCD backlight, keys and trim blink when the Float 'n Flash function is activated. (Default: OFF) 88