Icom IC-M92D Instruction Manual - Page 62
Receiving an Individual Call
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
New2001 8 DSC OPERATION D Receiving an Individual Call When an Individual Call is received: ➥ The alarm sounds for 2 minutes. ➥ "RCVD INDIVIDUAL CALL" pops up. The LCD backlight may blink for 2 minutes, depending on the received Category. q Push [ALARM OFF] to stop the alarm and the blinking backlight. • If [ALARM OFF] is not pushed within 2 minutes, the next screen may appear, depending on the received Category. w Push a softkey to select your desired action. [IGN] ➥ Push to ignore the Call and return to the normal operating mode. • The transceiver exits the DSC mode. • The Call is stored in the Received Call Log. • " " continues to blink and the Call is stored in the Received Call Log. [INFO] ➥ Push to display the Received call information. (p. 63) [ACK] ➥ Push to display the "INDIVIDUAL ACK" screen to re- ply to the Call, and select the channel specified by the calling station for voice communication, depending on your situation. See page 30 for details of the Individual Acknowledgement procedure. New When "INDIVIDUAL ACK" is set to "Auto ACK (Unable)," the transceiver automatically replies to the Call. In that case, both the TX and RX calls are stored in the Transmitted and Received Call Logs. 55