Icom IC-M92D Instruction Manual - Page 49
as shown below is displayed.
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
New2001 DSC OPERATION 8 r Push [CALL] to transmit the Test call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. t After the Test call has been transmitted, the following screen is displayed. • The transceiver waits for an acknowledgment call on channel 70 for 10 secconds, then waits for a call by alternately monitoring channel 70 and the operating channel. 1 y When the acknowledgement call is received, beeps sound and the following screen is displayed. 2 3 4 5 6 7 u Push [ALARM OFF] to stop the beeps, and then the screen as shown below is displayed. 8 9 10 11 12 i Push [EXIT] to return to the normal operating mode. 13 14 15 16 42
42
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Test call.
r
•
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Test call has been transmitted, the following
t
screen is displayed.
•
The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound
y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen
u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode.
i