Icom IC-M92D Instruction Manual - Page 83
Adding the waypoint: Push [ADD]
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
OTHER FUNCTIONS 9 Adding the waypoint: Push [ADD] 1 New waypoints can be manually programmed with a name e After entering the name, select "FINISH" by pushing [Y]/ and position data. [Z then push [ENTER] to set it and enter the posi- 2 q Push [ADD] to enter the name programming screen. • Any one of "WP01" to "WP50" appears as a default name. tion data editing screen. 3 • The current position data appears on each screen, as the de- fault. 4 • Select a desired number using [Y]/[Z • Select N (North latitude) or S (South latitude) when the cursor 5 is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cur- 6 w If desired, enter a 10 digit name in the following way: • Select a desired character using [Y]/[Z sor is on the 'W' or 'E' position. 7 • To move the cursor, select either arrow, "←" or "→," then push [ENTER]. 8 • To set the screen data, select "FINISH," then push [ENTER]. 9 • Push [ENTER] to set it. • To move the cursor, select either arrow, "←" or "→," then push 10 [ENTER]. 11 • Push [123], [!$?] or [ABC] to select a character group. 12 13 14 r After the confirmation screen appears, push [OK] to save the waypoint and return to the waypoint list screen. 15 16 76