Icom IC-M92D Instruction Manual - Page 75
Alarm, Channel 70 Squelch level
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
New2001 DSC OPERATION 8 D Alarm Set the Alarm function ON or OFF, depending on the Category or Status. q Enter "ALARM" in the DSC Settings menu. ❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮Alarm❯ (Push [MENU]) (Push [Y]/[Z], then push [ENTER].) w Push [] or [] to select the status, then push [ENTER]. • Push [BACK] to cancel and return to the DSC Settings menu. • "Safety," "Routine," "Warning," "Self-Terminate" and "Discrete" are selectable. (default: ON) e Push [] or [] to set the Alarm setting to "ON" or "OFF." r Push [EXIT] to return to the normal operating mode. D Channel 70 Squelch level 1 Set the squelch level on Channel 70. The transceiver has 11 squelch levels between 1 (loose 2 squelch) and 10 (tight squelch) and OPEN. 3 OPEN is completely open. 4 q Enter "CH 70 SQL LEVEL" in the DSC Settings menu. 5 ❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮CH 70 SQL Level❯ (Push [MENU]) (Push [Y]/[Z], then push [ENTER].) 6 w Push to adjust the squelch level until the 7 noise just disappears, then push [ENTER]. 8 • Push [BACK] to cancel and return to the DSC Settings menu. 9 10 (default) 11 12 13 e Push [EXIT] to return to the normal operating mode. 14 15 16 68