Icom IC-M92D Instruction Manual - Page 74
Channel 16 Switch function
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
New2001 8 DSC OPERATION D Channel 16 Switch function By regulation, after receiving a Distress call, the transceiver switches the operating channel to Channel 16. However, when this setting is set to "OFF," the function enables the transceiver to remain on the operating channel, even after receiving a Distress call. q Enter "CH 16 SWITCH" in the DSC Settings menu. ❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮CH 16 Switch❯ (Push [MENU]) (Push [Y]/[Z], then push [ENTER].) w Push [] or [] to set the Channel 16 Switch function to "Auto (No Delay)," "10 Second Delay" or "OFF," then push [ENTER]. • Push [BACK] to cancel and return to the DSC Settings menu. (default) Auto (No Delay) : After receiving a Distress call, and [ACPT] is pushed on the confirmation screen, the transceiver immediately switches to Channel 16. 10 Second Delay : After receiving a Distress call, and [ACPT] is pushed on the confirma- tion screen, the transceiver remains on the current operating channel for 10 seconds. After that, the transceiver automatically switches to Channel 16. (default) OFF : Even after receiving a Distress call, the transceiver remains on the operat- ing channel. • " " appears. e Push [EXIT] to return to the normal operating mode. New 67