Icom IC-M92D Instruction Manual - Page 84
Editing the waypoint: Push [EDIT], Deleting the waypoint: Push [DEL]
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
9 OTHER FUNCTIONS ■ Waypoint (Continued) Editing the waypoint: Push [EDIT] The stored waypoint name and its position data can be changed. q Push [EDIT] to enter the name programming screen. • The preprogrammed name is displayed. • If desired, enter a 10 digit name as described in the step w of the previous page. e After the confirmation screen appears, push [OK] to save the waypoint and return to the waypoint list screen. w Edit specific latitude and longitude data in the following way: • The preprogrammed position data appears on each screen. • Select a desired number using [Y]/[Z Push [ENTER] to set the digit. • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. • To move the cursor, select either arrow, "←" or "→," then push [ENTER]. • To set the screen data, select "FINISH," then push [ENTER]. Deleting the waypoint: Push [DEL] The stored waypoint can be deleted. Please note that a deleted waypoint cannot be restored. q Push [DEL] to delete the waypoint. • The confirmation screen "ARE YOU SURE?" appears. w Push [OK] to delete the waypoint and return to the waypoint list screen. 77