Icom IC-M92D Instruction Manual - Page 61
Receiving, a Distress Relay Acknowledgement
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
New2001 D Receiving a Distress Relay Acknowledgement When a Distress Relay Acknowledgement is received: ➥ The emergency alarm sounds for 2 minutes. ➥ "RCVD DIST RELAY ACK" pops up and the LCD backlight blinks. q Push [ALARM OFF] to stop the alarm and the blinking backlight. w Push a softkey to select your desired action. [IGN] ➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • By pushing [PTT], the transceiver also exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. DSC OPERATION 8 1 [INFO] ➥ Push to display the Received call information. (p. 63) 2 3 [ACPT] ➥ Push to accept the call. 4 And then, push [CH 16] to switch the operating channel 5 to Channel 16, and then monitor it, as a coast station may require assistance. 6 • If you haven't pushed [CH 16] within 10 seconds, the operating channel automatically switches to Channel 16. (p. 67) 7 8 9 10 11 Push 12 13 14 15 16 54