Icom IC-M92D Instruction Manual - Page 70
Received Call log
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
New2001 8 DSC OPERATION D Receiving a Test Acknowledgement Call When a Test Acknowledgement Call is received: ➥ The alarm sounds for 2 minutes. ➥ "RCVD TEST ACK" pops up. The LCD backlight blinks for 2 minutes. q Push [ALARM OFF] to stop the alarm and the blinking backlight. • If [ALARM OFF] is not pushed within 2 minutes, the next screen may appear, depending on the received Category. w Push a softkey to select your desired action. ■ Received Call log The transceiver automatically stores up to 50 distress messages and 50 other messages, and they can be used as a supplement to your logbook. • While in the normal operating mode, " " blinks in the upper right corner of the LCD when there is an unread message. D Distress message q Push [LOG] to enter "RCVD CALL LOG" in the DSC CALLS menu, or you can enter it through the Menu screen. ❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Received Call Log❯ (Push [MENU]) (Push [Y]/[Z], then push [ENTER].) w Push [] or [] to select "Distress," then push [ENTER]. • The Distress messages are stored in "Distress." • " " appears when there are unread messages. • " " appears when there are no unread messages. • No icon appears when there are no messages. New [EXIT] ➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. 63