Icom IC-M92D Instruction Manual - Page 81
Waypoint
View all Icom IC-M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
OTHER FUNCTIONS 9 ■ Waypoint 1 You can store your vessel's position information wherever you To store a received position: 2 are, and also the position information of the vessel you re- After receiving a DSC call that includes the position informa- 3 ceived a DSC call from, as a waypoint. The transceiver can store up to 50 waypoints. Each waypoint can be programmed tion, the position can be registered as a waypoint. q Enter "RCVD CALL LOG" in the DSC CALLS menu. 4 with an alphanumeric name for easy recognition. Names can be a maximum of 10 characters. ❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Received Call Log❯ (Push [MENU]) (Push then push [ENTER].) 5 6 To store your position: • Pushing the [LOG] softkey also opens the screen. 7 ➥ Hold down [WP] for 1 second to store the waypoint. • Two beeps sound. w Push [] or [] to select "Distress" or "Others," then push [ENTER]. 8 • After memorizing the waypoint, the information screen "WAY- e Push [] or [] to select the desired item, then push [EN- 9 POINT WAS STORED" appears. TER]. • If the GPS receiver has not yet calculated the position, the way- r Push [WP] to store. 10 point cannot be stored. • If you have already stored 50 waypoints, the new waypoint can- 11 not be stored. 12 13 14 • The confirmation screen "STORE WAYPOINT?" appears. 15 t Push [OK] to register the received position as a waypoint. • If you have already stored 50 waypoints, the new waypoint can- 16 not be stored. • The received position is stored with its MMSI ID code as the waypoint name. If the ID code has been programmed in your Individual address, the position is stored with the name instead of the ID code. 74