Intel S875WP1 Product Guide - Page 15

Intel 82801EB I/O Controller Hub (ICH5-R), Intel 82802AC Firmware Hub (FWH), Video - specifications

Page 15 highlights

Intel 82801EB I/O Controller Hub (ICH5-R) The Intel 82801EB ICH5-R has these features: • Upstream Hub Interface to the MCH • Integrated IDE controller (supports two Ultra ATA-100/66 mode, Ultra DMA 33 mode, and PIO mode). • Integrated SATA controller supports two SATA devices with transfer speeds up to 150 MB/s and independent DMA operation on the two ports • One USB 2.0-compliant host controller that supports all six USB ports • SMBus 2.0 interface • FWH interface • Support for the Low Pin Count (LPC) interface. • Integrated LAN controller (Intel 8562ET) for interfacing the ICH5-R LAN connect interface to the LAN connect component • 33 MHz Peripheral Component Interface (PCI) Local Bus slots supporting PCI specification, Rev 2.3. • Power management logic (ACPI Rev 2.0-compliant). • Support for two Ultra DMA 33 / ATA 100/66 connectors. Intel 82802AC Firmware Hub (FWH) The Intel 82802AC Firmware Hub (FWH) includes an 8 megabit symmetrical flash memory device. Internally, the device is grouped into eight 64 KB blocks that are individually erasable, lockable, and unlockable. The FWH provides the following: • System BIOS program • Logic that enables protection for storing and updating of platform information Video The server board S875WP1-E contains two separate, mutually exclusive graphics subsystems. You can use either the AGP connector or the ATI Rage XL video controller. When an AGP card is installed, the integrated 8 MB video controller is disabled. Server Board Features 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Server Board Features
15
Intel 82801EB I/O Controller Hub (ICH5-R)
The Intel 82801EB ICH5-R has these features:
Upstream Hub Interface to the MCH
Integrated IDE controller (supports two Ultra ATA-100/66 mode, Ultra DMA 33 mode, and
PIO mode).
Integrated SATA controller supports two SATA devices with transfer speeds up to 150 MB/s
and independent DMA operation on the two ports
One USB 2.0-compliant host controller that supports all six USB ports
SMBus 2.0 interface
FWH interface
Support for the Low Pin Count (LPC) interface.
Integrated LAN controller (Intel 8562ET) for interfacing the ICH5-R LAN connect interface to
the LAN connect component
33 MHz Peripheral Component Interface (PCI) Local Bus slots supporting PCI
specification, Rev 2.3.
Power management logic (ACPI Rev 2.0-compliant).
Support for two Ultra DMA 33 / ATA 100/66 connectors.
Intel 82802AC Firmware Hub (FWH)
The Intel 82802AC Firmware Hub (FWH) includes an 8 megabit symmetrical flash memory
device.
Internally, the device is grouped into eight 64 KB blocks that are individually erasable,
lockable, and unlockable.
The FWH provides the following:
System BIOS program
Logic that enables protection for storing and updating of platform information
Video
The server board S875WP1-E contains two separate, mutually exclusive graphics subsystems.
You
can use either the AGP connector or the ATI Rage XL video controller.
When an AGP card is
installed, the integrated 8 MB video controller is disabled.