Intel S875WP1 Product Guide - Page 66
Updating the BIOS, The AUTOEXEC.BAT
UPC - 735858161381
View all Intel S875WP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Updating the BIOS CAUTION The AUTOEXEC.BAT file provided with the update files updates the BIOS in two parts: first updating the boot block and displaying the Operation completed successfully message and second, updating the BIOS core. You will be asked to reboot the system when the update process is complete. Do not interrupt the process or the system may not be capable of rebooting. 1. Boot the server with the bootable BIOS upgrade diskette in drive A. During system boot, the AUTOEXEC.BAT file provided with the update files will automatically run the BIOS update process. The AUTOEXEC.BAT file updates the BIOS in two parts: first updating the boot block and displaying the Operation completed successfully message and then updating the BIOS core. 2. When the update process is complete, the monitor will display a message telling you to remove the diskette and to reboot the system. 3. As the server boots, check the BIOS identifier (version number) to make sure the upgrade was successful. If a logo appears, press to view the POST messages. 4. Enter BIOS Setup program by pressing when you see the message: Press to Run SETUP 5. For proper operation, load the BIOS Setup program defaults. To load the defaults, press . 6. To accept the defaults, press . 7. In Setup, enter the settings you wrote down before beginning the BIOS upgrade. 8. To save the settings, press . 9. To accept the settings, press . 10. Turn off the server and reboot. 66 Intel Server Board S875WP1-E Product Guide