Intel S875WP1 Product Guide - Page 54

Connecting the Serial ATA Cable (Optional), S875WD1LX includes three SATA cables. - s875wp1lx motherboard

Get Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH PDF manuals and user guides
UPC - 735858161381
View all Intel S875WP1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Connecting the Serial ATA Cable (Optional) The Intel server board S875WD1 includes two Serial ATA (SATA) cables and the server board S875WD1LX includes three SATA cables. These 4-conductor cables support the Serial ATA protocol. Each cable connects a single drive to the server board. For correct cable function, either end of the cable can be connected to the SATA drive or to the connector on the board (see Figure 19). 1. Observe the precautions in "Before You Begin" on page 39. 2. Attach either cable end to the connector (A) on the board. 3. Attach either cable end to the connector (B) on the drive. A B Figure 19. Connecting the SATA Cable TP00193 ✏ NOTE For instructions on installing and configuring Serial ATA RAID on the 4-port Promise Controller that is available on the server board S875WP1LX, please see http://support.intel.com/support/motherboards/server/s875wp1e/sata-install.htm 54 Intel Server Board S875WP1-E Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
54
Intel Server Board S875WP1-E Product Guide
Connecting the Serial ATA Cable (Optional)
The Intel server board S875WD1 includes two Serial ATA (SATA) cables and the server board
S875WD1LX includes three SATA cables.
These 4-conductor cables support the Serial ATA
protocol.
Each cable connects a single drive to the server board.
For correct cable function, either end of the cable can be connected to the SATA drive or to the
connector on the board (see Figure 19).
1.
Observe the precautions in “Before You Begin” on page 39.
2.
Attach either cable end to the connector (A) on the board.
3.
Attach either cable end to the connector (B) on the drive.
TP00193
A
B
Figure 19. Connecting the SATA Cable
NOTE
For instructions on installing and configuring Serial ATA RAID on the 4-port
Promise Controller that is available on the server board S875WP1LX, please see